Therminol^® Information Bulletin No. 5 – Moisture Removal from Therminol D-12 Cooling Systems

For single organic heat transfer media used in cooling systems, it is important to prevent the chiller heat exchanger surfaces from being coated with ice. This icing will reduce the efficiency of the chiller and can occasionally cause blockage in the system piping. Moisture will also cause volatility problems during heating cycles, such as pump cavitation and two-phase flow. This informational bulletin provides various methods of moisture removal including:

• Water Removal from the Heat Transfer System Prior to Therminol D-12 Introduction
• Free Water Removal From Therminol D-12 in the System
• Saturated Water Removal From Therminol D-12
• Water Removal by Molecular Sieves and General Operating Parameters for Molecular Sieve Systems
• System Design and Operating Considerations
• Moisture Removal From Therminol LT Systems

Click on the link below to download this bulletin.

Moisture Removal from Therminol D-12 Cooling Systems