Flush Fluid and Fluid Refill

Liquid phase heat transfer systems can be cleaned with Therminol® FF Flush Fluid. This synthetic hydrocarbon heat transfer fluid features a flash point over 200° F (95° C) and initial boiling point over 400° F (200° C). Therminol FF can be circulated over a wide temperature range and is compatible with mechanical system components found in heat transfer systems.

After the system is flushed, the appropriate liquid phase Therminol heat transfer fluid can be added. Small amounts of Therminol FF remaining in the system are compatible with Therminol heat transfer fluids.

In North America, call our hotline: 1-800-433-6997, or contact your local sales representative.