Therminol FF Flush Fluid
|
View MSDS

Product Bulletin
|
|
|
|
|
Therminol FF is the first synthetic flushing fluid for liquid phase heat transfer systems. Deposits from oxidized, thermally degraded or contaminated fluid can foul interior surfaces, making it necessary to clean the system prior to charging with new fluid. Performance features of Therminol FF include:
|
- Fast and Easy - Using Therminol FF to flush your fouled system is faster than chemical cleaning and requires less downtime. This is because you simply drain the old fluid, add Therminol FF and circulate, drain and re-fill with your new heat transfer fluid.
- Less Costly - Therminol FF is a key component of a low cost alternative to chemically cleaning a heat transfer system containing severely degraded or contaminated organic heat transfer fluid. Solutia can supply Therminol FF and then take it back after it is used at no additional cost. Our cradle-to-grave approach eliminates expensive disposal costs.
- Compatible With New Fluid - Therminol FF is compatible and miscible with most organic heat transfer fluids, which means less downtime is required for system cleaning.
- Safe - Therminol FF is a synthetic hydrocarbon with a high flash point and high initial boiling point, making it much safer to use than other cleaning solvents.
- Technical Service and Support - To help you decide on the correct clean-out procedure, your Therminol specialist can help you develop the necessary parameters required to maximize the effectiveness of the flushing process.
Our technical service hotline can be reached 24 hours a day by calling toll-free 1-800-433-6997. During normal working hours, this line will be answered by an experienced technical service specialist.

Click here to download the product bulletin containing detailed physical and transport properties for Therminol FF.

Therminol® FF Flush Fluid
| Appearance |
Dark amber liquid |
| Composition |
Synthetic
hydrocarbon |
| Moisture Content |
200ppm |
| Flash Point (ASTM
D-92) |
>250°F (120° C) |
| Fire Point (ASTM
D-92) |
>270°F (130° C) |
| Boiling Range (ASTM
D20) |
420°F - 550°F (215°C - 287°C) |
| Viscosity, at 25
°C |
2-5 cSt |
| Density at 25°C |
0.96 - 0.98 g/cm3 |
NOTICE: Although the information and recommendations set forth herein (hereinafter "Information") are presented in good faith and believed to be correct as of the date hereof, Solutia makes no representations or warranties as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Solutia be responsible for damages of any nature whatsoever resulting from the use of or reliance upon Information or the product to which Information refers. Nothing contained herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Solutia makes no representation or warranty, express or implied, that the use thereof will not infringe any patent.
NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
Therminol® is a registered trademark of Solutia Inc.
|